Localize Your Crane
From single- to double-girder, underslung and low-headroom designs. Pick a category or send span, capacity and duty class for a fast proposal.
Local-Weld Beam Solution
Oversized girders make freight hard and expensive. We ship a beam-free kit—all crane components except the main/bridge girders and end-beam steelwork—plus interface drawings and guidance. You weld beams locally, assemble on site, and cut freight & lead time.
Where it applies
Bridge (overhead), gantry and jib cranes are all supported with local-weld options. Click to view your category pages.
Overhead
Gantry
Jib
Quick Estimator (Volume & Package Count)
Enter package dimensions and quantity to estimate total volume (CBM), package count and a rough container suggestion. Toggle the tab to include full beams for comparison. Results are indicative only—final packing varies by project.
Tip: Add typical kit pieces like hoist, control panel, end carriages, rails (if supplied), festoon, power bars, etc.
* Rule-of-thumb: ~28 CBM (20′), ~68 CBM (40′ HQ). We will optimize packing per project.
- CBM = L×W×H×Qty; unit conversion applied globally.
- Suggested pallets: ~1.7 m³ per pallet (rough planning only).
- Use the RFQ form below to get an engineered packing list.
Who is this solution for?
Local-weld kits work best when you have at least basic steel fabrication resources on site or nearby. Typical use cases:
Export projects with high freight cost
When beams push you into oversize loads or break-bulk, shipping only kits can dramatically reduce freight.
- Remote mining & energy sites
- Islands and inland destinations
- Multi-crane projects
Clients with trusted local fabricators
You already work with steel shops that know local codes. We provide loads & interfaces; they fabricate beams.
- Existing workshops & contractors
- Local welding and machining capability
- Need clear drawings and guidance
Fast-track & phased projects
Local fabrication and kit production can run in parallel to compress overall schedule and ease approvals.
- Short installation windows
- Brownfield plants with constraints
- Multiple phases or expansions
What’s typically in the kit
Browse by function. Cards link to your existing category pages. Filter by role in the crane system.
Power & Control
Travel & Drive
Hoist & Trolley
Lifting
Rails
Safety
Panels & Drives
Rigging
How it works
Engineering, fabrication and assembly are split clearly between CYCRANE and your local team.
Benefits & responsibility split
| Dimension | Ship full crane | Local-weld kit |
|---|---|---|
| Shipping volume | Oversized beams with limited stacking | Drastically reduced (kits only) |
| Customs / handling | Heavy/oversize handling & permits | Standard packages with clear breakdown |
| Lead time | Sequential: manufacture then ship | Parallel: local fabrication + kit production |
| Future upgrades | Harder to modify interfaces | Standardised interfaces & documentation |
CYCRANE scope
- Crane configuration & duty classification.
- Wheel loads, rail loads and interface forces.
- End carriage, drive, hoist and control selection.
- GA & interface drawings (girders/end-beams, wheel centers, hole maps).
- Electrical single-line & terminal diagrams, I/O list, VFD guidelines.
- Packing list and shipping documentation for kits.
Local partner / client scope
- Girder and runway fabrication per interface drawings.
- Site measurements, foundations and alignment.
- Local codes, inspections and certifications as required.
- On-site installation of beams, rails and kits.
- Support for commissioning, load tests and handover.
- Routine maintenance using supplied documentation.
Deliverables & standards
What you receive
- GA & interface drawings (girders/end-beams, wheel centers, hole maps).
- Wheel loads & rail loads, clearances and hook approaches.
- Electrical single-line and terminal plans, VFD parameter guidelines, I/O list.
- Power supply routing (busbar/drag chain/festoon) and cable schedules.
- Commissioning checklist, load-test procedures and acceptance templates.
Referenced standards (examples)
- FEM/EN, ISO, GB/T, CMAA (per region and crane type).
- ATEX/IECEx if explosion-proof equipment is required.
- Cleanroom, food, marine coatings and corrosion classes if specified.
- Weld classes and NDT requirements defined in the interface pack.
- Local code references can be incorporated when provided.
Request a beam-free kit proposal
Please include: capacity, span, lift height, duty class, building/rail conditions, power supply, environment (outdoor/ex-proof/cleanroom), preferred crane family (overhead/gantry/jib) and on-site capabilities.
Contact Form
Why CYCRANE?
- Complete kits with clear interface engineering.
- Remote / on-site commissioning & training support.
- Fast lead time & global shipping network.
- Spare parts, modernisation and after-sales service.