CYCRANE / Steerable heavy-load transport
Steerable
Transfer Cart.
Move with the route.
Match the steering to your floor.
Transfer heavy loads through your workshop with front, rear, four-wheel or crab/omni steering options. Configure the deck, wheels, power and operating target around the load and route.
- 5–200 tCapacity range
- 2–12 mDeck length
- 4 optionsSteering modes
- Battery / cable-reel / hybrid
- Custom decks & fixtures
- Floor & route review
STEERABLE TRANSFER / LOAD & ROUTE CONFIGURATIONStart with the route.Define the load, aisle widths and floor conditions.
- 01Load & deck
- 02Floor & steering
- 03Power & duty
01 / Built around the load and movement
Define the movement.
Review the complete route.
Steering options help match a cart to its transfer task. Wheelbase, load position, aisle width, gradients and the running surface determine the final arrangement.
- 01 / STEERING
Choose the movement.
Front, rear, four-wheel or crab/omni selections for review against the required approach and positioning.
- 02 / FLOOR CONTACT
Match the wheels.
PU, solid rubber or steel options. Confirm the running surface, wheel loads and contact requirements.
- 03 / POWER SYSTEM
Plan the operating cycle.
LiFePO₄ or lead-acid battery, cable-reel and diesel-hybrid choices, matched to the duty and route.
- 04 / LOAD SUPPORT
A deck for the task.
Discuss coil supports, mold frames, fixtures, restraints and loading access for your load.
02 / Configure your steerable transfer cart
Define the cart.
Plan the movement and duty.
Adjust the 14 original configuration choices. Your indicative EXW budget, width-based layout reference and complete enquiry update together.
Build Your Spec
Start from the sample configuration. Floor loading, steering clearance, gradeability and runtime require engineering confirmation.
Runtime is a requested target, subject to battery and duty review.
Confirm the route, floor, power and operating duty.
03 / Technical reference
Load, chassis and steering.
One transport arrangement.
Review the original specification range against your floor and route. Wheel loading, braking, battery sizing, protection and test scope are confirmed in the proposal.
| Type | Self‑propelled, steerable transfer cart with electric traction & steerable axles |
|---|---|
| Rated Capacity | 5–200 t standard (custom on request) |
| Deck Size | 2–12 m length × 1.5–4 m width; custom fixtures available |
| Max Speed | 10–40 m/min (VFD) |
| Steering | Front / Rear / Four‑wheel / Crab (omni) steer |
| Drive Power | LiFePO₄ or lead‑acid battery; cable‑reel; diesel‑hybrid |
| Control | Pendant / Radio remote / Cabin |
| Wheels | PU / Solid rubber / Steel; non‑marring options |
| Gradeability | Up to 8% (by spec) |
| Brakes | Electro‑hydraulic or electromagnetic, regenerative on drive |
| Safety | E‑stop, horn, strobes; options for blue‑light, LiDAR, soft bumpers, zone limits |
| Environment | Indoor / Outdoor; high/low temp & dusty packages |
| Finish | Industrial epoxy; outdoor C3–C4 system |
| Docs | CE/ISO documentation requirements and FAT load test / video records: confirm applicable scope in the proposal. |
Higher capacities and special requirements can be discussed. CE / ISO documentation, FAT reporting and the original one-year warranty are confirmed within the agreed contract and supply scope.
04 / Workshop movement
Connect the operations.
Review every approach and turn.
Discuss heavy-load transfers and positioning for steel, molds, frames or assemblies. Route drawings determine the required movement and clearance.
Platforms for heavy-load transfer
Confirm support points, deck size, loading access and restraint for the actual load.
ROUTE REVIEW / BEFORE ORDERING
The floor plan defines
the steering requirement.
- 01 / APPROACHMark loading points and the intended direction of travel.
- 02 / CLEARANCEShow the narrowest aisles, obstacles and turning spaces.
- 03 / RUNNING SURFACEIdentify joints, ramps, gradients and floor-loading limits.
- 04 / OPERATING CYCLERecord trips, stops and charging or power-supply arrangements.
05 / From enquiry to commissioning
Review the movement.
Agree the complete scope.
Coordinate the cart, steering, floor and power system before ordering. Testing and site services are recorded in the proposal.
- 01 / SIZING
Load & route.
Share dimensions, floor data and steering needs.
- 02 / PROPOSAL
Chassis & budget.
Review wheel loads, steering and power choices.
- 03 / MANUFACTURING
Build & test.
Agree load, steering, brake and functional checks.
- 04 / DELIVERY
Pack & ship.
Confirm crating, logistics and documents.
- 05 / COMMISSIONING
Check & hand over.
Confirm site checks, training and maintenance guidance.
06 / Useful steerable-cart questions
Before you specify
a steerable transfer cart.
Start with your load, floor and complete route. Undecided details can be reviewed with the project team.
Discuss your steering requirements ↗Which steering arrangement should I choose?
Share the intended movements and route drawing. Front, rear, four-wheel and crab/omni options are enquiry choices; final suitability depends on the chassis, wheelbase, load and clearance.
Does crab/omni steering mean zero-radius rotation?
Not automatically. Sideways travel, coordinated steering and rotation are different capabilities. Confirm the required movements and the actual steering mechanism in the project drawings.
Is the displayed width-based reference a true turning radius?
No. It retains the original deck-width factors as an unverified layout guide. Actual turning and swept paths depend on wheelbase, steering angles, overhangs and the load envelope.
Is the selected runtime guaranteed?
No. For battery power, it is the requested target for battery and duty review. Actual endurance depends on battery capacity, load, auxiliaries, starts, temperature and the route. For cable-reel or diesel-hybrid power it records the operating period; the original budget has no runtime factor for those options.
Can I specify a slope and different wheel types?
Yes. The original options include 0–8% requested gradeability and PU, solid-rubber or steel wheels. The project team must verify the load, floor, traction, wheel pressure and braking. Selecting a value is not a performance guarantee.
What does the displayed budget mean?
The main range is the indicative EXW equipment budget for the selected number of carts using the original model. Multiple carts show an equivalent per-cart range. Final fixtures, steering, battery, protection, freight, tax, price and schedule require confirmation.
07 / Your steerable cart enquiry
Tell us the load.
Show us the route and floor.
Your selected specification, indicative budget and layout reference are included with your enquiry. Add your destination, floor details and required movements for review.
- WhatsApp / phone+86 155 1554 5327
- Sales enquiriessales@cy-cranes.com
- Talk about your projectCall +86 155 1554 5327
Useful files: load dimensions, route layout, aisle widths, floor details and site photos. Include gradients, required steering movements, trips and operating hours.
Request a Steerable Transfer Cart Quote
Start with your email and destination. Add the project details you already know.
Review the configuration included with your enquiry
Prefer email? Send your configuration ↗